165 Watt UV sterilizer
The 165 Watt UV sterilizer is used for professional users for flow rates not exceeding 90 liters per minute on clear water.
The sterilizer is in stainless steel 304, with 1 "MM [...]
The 165 Watt UV sterilizer is used for professional users for flow rates not exceeding 90 liters per minute on clear water.
The sterilizer is in stainless steel 304, with 1 "MM connections, in stainless steel. The 165 Watt sterilizer has three germicidal UV lamps of 55 Watt, with quartz sheaths.
The 165 Watt UV sterilizer works with 220 V power supply.
The 165 Watt UV sterilizer is generally installed at the entrance of a complex user such as a house with several apartments
The use of the 165 Watt UV sterilizer on well water requires an upstream treatment that eliminates turbidity and suspended material. Where the water is particularly hard, it is important to carry out periodic maintenance to clean the quartz sheath. The limestone tends to settle on the surfaces of the sheath making it opaque to UV rays and therefore drastically reducing its germicidal capacity. For maintenance it is important to install a by pass.
The replacement of the three 55 Watt lamps (Philips) must be done regularly and not exceed 12 months of operation, the manufacturer indicates a decline of more than 60\% of the UV emission capacity after 9200 hours of operation.
- Power Supply
- 220 V 50/60 Hz
- Guaranteed UV-C dose
- 30,000 μWs/cm2
- Lamp service life
- 9250 h
- Inner conduit
- N 3 quartz very pure >99.99 SiO2
- Overall dimensions (mm) Diameter x L
- 133 x 965
- Emitted wavelength
- 253.7 nm (UV-C)
- Body material
- AISI 304 stainless steel
- Consumables
- Bulb UV 55 Watt 2+2 pin
- Maximum flow rate
- 90 litres per minute
- Spare parts
- Silicone gasket for quartz sleeve, Quartz sleeve, Igniter - Ballast UV 110 watts